Building a dock ... my DIY Experiment: Part 4

Part 4: Finishing Phase 1 and 2

I managed to get out the next day and finish off phase 1. Phase 2 was going to be a walkway onto the dock. I managed to wrangle some materials to start the skeleton of this.

Here is what the dock looked like after phase 1 was complete:

                                  

Building a dock ... my DIY Experiment: Part 3

Part 3: Finishing the frame and adding planks

Sunday was another nice day. After wrapping up a few necessary farm chores, I rounded up all the older kids and headed down again. I took all the same items as the previous day as I might need them.

Once I was down there, I decided I would put another 2x6 on the inside of all of the posts. I put a chunk of post at the end on the right side to space it out properly. I used my level to keep the two boards level. 

After completing this, I proceeded to go through my remining 2x6s and cut boards. The length needed was approximately 53 inches, so I was able to get two planks per board for the most part. The excess I used to pick off split ends. After using them all up I realized I would need another 5-6 boards to complete the job. The kids were good but it was time to go in. 

Building a Dock ... my DIY experiment: Part 2

Part 2: Building the frame

This weekend was very favourable for me. I enjoyed a wonderful morning of worship workshops with Worship Victoria, then had time to spend out by the pond with the kids building my dock project.

On Saturday afternoon, I had a few hours where Hannah was with her grandparents, Charlotte was napping, and the boys were in my charge. I threw on my swim trunks and grabbed the boy's their boots and headed down to the workshop.

Building a Dock ... my DIY experiment: Part 1

Part 1: Dreams and Plans

For a while now, I have been eyeing our pond and wondering how hard it would be to build a dock for it. I'm thinking of a small dock, no longer than 8-10 feet out. Something to tie a canoe to. I don't own a canoe. Details...